The FUZE timecode generator uses a temperature compensated oscillator. The clock has a tolerance of +/-1ppm, capable of achieving an accuracy of less than one frame drift over a 24 hour period. Operating at temperatures from -10 to 60°C while maintaining a stability of +/-1ppm. Right on par with Ambient and Denecke devices. The projected 10-year tolerance of our clock is +/-3.5ppm, a mass improvement over the typical +/-10ppm temperature-compensated quartz crystal over 10 years.
|•1/4" TRS Input/Output
•Standard 5-pin Lemo Input/Output
| •Button to view last clapped time
•Easy access brightness knob
|•Uses four "AA" Batteries
•Easy navigation button to setup time and user data
•USB allows for potential firmware updates
| •External DC power accepts 5-16V
•Power and low battery indicator
|•Weatherproof (IP55) comes as standard*
Due to the nature of 3D printing process the finish on the encolsure varies print to print. There will be cosmetic differences from pictures above.
*To obtain full seal we highly recommend you use a screw driver to tighten the battery compartment thumb screws.
You have no items in your shopping cart.